View NLFC453232T-100K-PF_8387137.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

inductors nlfv25 2520 [1008 inch]* nlfv32 3225 [1210 inch] * dimensions code jis[eia] july 2013 inductors for decoupling circuits wound ferrite nlfv series
(2/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm reminders for using these products before using these products, be sure to request the delivery specifications. safety reminders please pay sufficient attention to the warnings for safe designing when using these products. the storage period is less than 6 months. be sure to follow the storage conditions (temperature: 5 to 40c, humidity: 10 to 75 % rh or less). if the storage period elapses, the soldering of the terminal electrodes may deteriorate. do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.). before soldering, be sure to preheat components. the preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature does not exceed 150c. soldering corrections after mounting should be within the range of the conditions determined in the specifications. if overheated, a short circuit, performance deterioration, or lifespan shortening may occur. when embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions. self heating (temperature increase) occurs when the power is turned on, so the tolerance should be sufficient for the set therm al design. carefully lay out the coil for the circuit board design of the non-magnetic shield type. a malfunction may occur due to magnetic interference. use a wrist band to discharge static electricity in your body through the grounding wire. do not expose the products to magnets or magnetic fields. do not use for a purpose outside of the contents regulated in the delivery specifications. the products listed on this catalog are intended for use in general electronic equipment (av equipment, telecommunications equipment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipment, industrial robots) under a normal operation and use condition. the products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property. if you intend to use the products in the applications listed below or if you have special requirements exceeding the range or c onditions set forth in the each catalog, please contact us. (1) aerospace/aviation equipment (2) transportation equipment (cars, electric trains, ships, etc.) (3) medical equipment (4) power-generation control equipment (5) atomic energy-related equipment (6) seabed equipment (7) transportation control equipment (8) public information-processing equipment (9) military equipment (10) electric heating apparatus, burning equipment (11) disaster prevention/crime prevention equipment (12) safety equipment (13) other applications that are not considered general-purpose applications when designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securi ng protection circuit/device or providing backup circuits in your equipment. reminders
(3/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. inductors for decoupling circuits wound ferrite features resin mold type wound induct or for decoupling circuits. magnetic shield type containing ferrite po wder in the exterior mold resin. application smart meters, av equipment, xdsl, electronic devices for communications infrastruct ure such as mobile base stations, industrial equipment, other part number construction operating temperature range, pack age quantity, product weight operating temperature range includes self-temperature rise. the storage temperature range is for after the circuit board is mounted. product compatible with rohs directive halogen-free compatible with lead-free solders overview of the nlfv series nlfv 25 t - 1r0 m - ?? series name lwh dimensions packaging style inductance inductance tolerance internal code (mm) (h) 25 2.52.01.8 t taping 1r0 1 k 10% pf compatible with the rohs directive, exemption regulations apply 32 3.22.52.2 100 10 m 20% 101 100 102 1000 ef compatible with the rohs directive type temperature range package quantity individual weight operating temperature storage temperature c c (pieces/reel) mg nlfv25 C40 to +105 C40 to +105 2000 25 nlfv32 C40 to +105 C40 to +105 2000 50 rohs directive compliant product: see the following for more details related to rohs directive compliant products. http://www.t dk.co.jp/rohs/ halogen-free: indicates that cl content is less than 900ppm, br content is less than 900ppm, and that the total cl and br conte nt is less than 1500ppm.
(4/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. overview of the nlfv series recommended reflow profile preheating soldering peak temp. time temp. time temp. time t1 t2 t1 t3 t2 t4 t3 150c 180c 90 to 120s 230c 40s 255c 10s max. natural cooling t3 t1 preheating t2 soldering t3 t3 t4 t2 t1 t: time peak t: temperature
(5/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series nlfv25 type shape & dimensions recommended land pattern dimensions in mm 2.50.2 20.1 1.40.1 1.80.1 0.5 ( 0.4 ) ( 1.7 )( 0.4 ) dimensions in mm 1.5 1.0 1.5 1.0
(6/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv25 type electrical characteristics characteristics specification table rated current: smaller value of either idc1 or idc2. idc1: when based on the inductance change rate (10% below the initial l value) idc2: when based on the temperature increase (temperature increase of 20c by self heating) ? : please specify internal code, pf (compatible with the rohs directive, exemption regulations apply) or ef (compatible with the rohs directive) measurement equipment ? equivalent measurement equipment may be used. l l measuring frequency (mhz) dc resistance ( )20% rated current (ma) max. part no. (h) tolerance 1 20% 7.96 0.07 455 nlfv25t-1r0m- 1.5 20% 7.96 0.09 350 nlfv25t-1r5m- 2.2 20% 7.96 0.1 315 nlfv25t-2r2m- 3.3 20% 7.96 0.2 280 nlfv25t-3r3m- 4.7 20% 7.96 0.24 210 nlfv25t-4r7m- 6.8 20% 7.96 0.29 175 nlfv25t-6r8m- 10 10% 2.52 0.36 155 nlfv25t-100k- 15 10% 2.52 0.75 130 nlfv25t-150k- 22 10% 2.52 1 105 nlfv25t-220k- 33 10% 2.52 1.4 85 nlfv25t-330k- 47 10% 2.52 1.7 60 nlfv25t-470k- 68 10% 2.52 3.3 50 nlfv25t-680k- 100 10% 0.796 4 40 nlfv25t-101k- measurement item product no. manufacturer l 4194a+16085a+16093b agilent technologies dc resistance vp-2941a panasonic
(7/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv25 type electrical characteristics l frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.1 10 1 100 0.1 1000 100 1 10 frequency ( mhz ) inductance ( h ) 101k 680k 470k 330k 220k 150k 100k 6r8m 4r7m 3r3m 2r2m 1r5m 1r0m product no. manufacturer 4294a agilent technologies
(8/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv25type electrical characteristics inductance vs. dc bias characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.01 0.1 1 10 0.1 10 1 100 1000 dc current ( a ) inductance ( h ) 101k 680k 470k 330k 220k 150k 100k 6r8m 4r7m 3r3m 2r2m 1r5m 1r0m product no. manufacturer 4285a+42841a+42842c agilent technologies
(9/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv25type electrical characteristics impedance frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.1 10 1 1000 100 0.1 100000 100 1000 10000 1 10 impedance ( ) frequency ( mhz ) 101k 680k 470k 220k 150k 100k 330k 6r8m 1r0m 1r5m 2r2m 4r7m 3r3m product no. manufacturer 4294a agilent technologies
(10/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series nlfv32 type shape & dimensions recommended land pattern dimensions in mm 3.20.2 2.50.2 1.90.1 2.20.2 0.55 ( 0.55 ) ( 2.1 )( 0.55 ) 100 dimensions in mm 2 1.2 2 1.2
(11/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv32type electrical characteristics characteristics specification table rated current: smaller value of either idc1 or idc2. idc1: when based on the inductance change rate (10% below the initial l value) idc2: when based on the temperature increase (temperature increase of 20c by self heating) measurement equipment ? equivalent measurement equipment may be used. l l measuring frequency (mhz) dc resistance ( )20% rated current (ma) max. part no. (h) tolerance 1 20% 7.96 0.06 750 nlfv32t-1r0m-ef 1.5 20% 7.96 0.07 600 nlfv32t-1r5m-ef 2.2 20% 7.96 0.09 500 nlfv32t-2r2m-ef 3.3 20% 7.96 0.11 420 nlfv32t-3r3m-ef 4.7 20% 7.96 0.13 360 nlfv32t-4r7m-ef 6.8 20% 7.96 0.17 260 nlfv32t-6r8m-ef 10 10% 2.52 0.20 250 nlfv32t-100k-ef 15 10% 2.52 0.30 140 nlfv32t-150k-ef 22 10% 2.52 0.40 120 nlfv32t-220k-ef 33 10% 2.52 0.65 95 nlfv32t-330k-ef 47 10% 2.52 0.85 90 nlfv32t-470k-ef 68 10% 2.52 1.3 70 nlfv32t-680k-ef 100 10% 0.796 2.2 55 nlfv32t-101k-ef 150 10% 0.796 2.9 50 nlfv32t-151k-ef 220 10% 0.796 5.1 40 nlfv32t-221k-ef 330 10% 0.796 6.8 35 nlfv32t-331k-ef 470 10% 0.796 14.5 30 nlfv32t-471k-ef 680 10% 0.796 18.5 25 nlfv32t-681k-ef 1000 10% 0.252 22.5 20 nlfv32t-102k-ef measurement item product no. manufacturer l 4194a+16085a+16093b agilent technologies dc resistance vp-2941a panasonic
(12/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv32 type electrical characteristics l frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.1 10 1 100 0.01 0. 1 10000 100 1000 1 10 frequency ( mhz ) inductance ( h ) 102k 681k 471k 331k 221k 151k 101k 680k 470k 330k 220k 150k 100k 6r8m 4r7m 3r3m 2r2m 1r0m 1r5m product no. manufacturer 4294a agilent technologies
(13/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv32 type electrical characteristics inductance vs. dc bias characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.01 0.1 1 10 0.1 10 1 100 10000 1000 dc current ( a ) inductance ( h ) 102k 681k 471k 331k 221k 151k 101k 680k 470k 330k 220k 150k 100k 6r8m 4r7m 3r3m 2r2m 1r5m 1r0m product no. manufacturer 4285a+42841a+42842c agilent technologies
(14/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series y nlfv32 type electrical characteristics impedance frequency characteristics graph measurement equipment ? equivalent measurement equipment may be used. 0.1 10 1 100 impedance ( ) frequency ( mhz ) 0.01 0.1 1 10 100 1000 10000 100000 1000000 102k 681k 471k 331k 151k 101k 680k 330k 221k 470k 220k 1r0m 150k 100k 6r8m 4r7m 3r3m 2r2m 1r5m product no. manufacturer 4294a agilent technologies
(15/15) inductors 001-01 / 20130731 / inductor_commercial_decoupling_nlfv_en.fm ? all specifications are subject to change without notice. nlfv series packaging style reel dimensions * these values are typical values. tape dimensions type a w1 w2 n e nlfv25 ?180 9 13 ?60 0.5 nlfv32 ?180 9 13 ?60 0.5 ?13.0 0.5 ?21.0 0.8 2.0 0.5 a ( 1.0 ) dimensions in mm n e w2 w1 fe w p0p2?d0 p1 a t b k dimensions in mm ty p e a b ?d0 e f p0 p1 p2 w k t nlfv25 2.3 2.7 1.5+0.1/-0 1.750.1 3.500.05 4.000.10 4.000.10 2.000.05 8.000.30 2 0.4 nlfv32 2.8 3.5 1.5+0.1/-0 1.750.1 3.500.05 4.000.10 4.000.10 2.000.05 8.000.30 2.3 0.4
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tdk: ? nlfv25t-1r0m-pf? nlfv25t-2r2m-pf? nlfv25t-220k-pf? nlfv25t-680k-pf? nlfv25t-6r8m-pf? nlfv25t- 470k-pf? nlfv25t-3r3m-pf? nlfc453232t-1r5m-pf? NLFC453232T-100K-PF? nlfc453232t-101k-pf? nlfc453232t-150k-pf? nlfc453232t-220k-pf? nlfc453232t-2r2m-pf? nlfc453232t-330k-pf? nlfc453232t- 470k-pf? nlfc453232t-4r7m-pf? nlfc453232t-680k-pf? nlfc453232t-6r8m-pf? nlfc453232t-221k-pf

▲Up To Search▲

Price & Availability of NLFC453232T-100K-PF

	To Download NLFC453232T-100K-PF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .